The Pulsite Solo digital rate and totaliser with battery or dc power

spec-logo Pulsite Solo Rate & Toal Indicator – Technical Specification

Display: IP64 Enclosure
Enclosure: Tough polymer housing
Display: Trans-reflective LCD display with 6 x 8mm high numerals with 2.5mm enunciators
Power: Battery (5 years typical life) 5 – 24V dc
Input
      Pulse – 2KHz maximum (VIL< 0.5V and VIH > 3V)
Coil 3mv – 24V sine wave, 2KHz max
Transistor – 24V max
Contact closure – 100Hz
Unit Display: 9.99999 to 999999
Enunciators
Total: No units, Gal, cc, kg, gms & Ltr
Rate: Total units plus flashing -Sec, min & Hr

* The battery is a Saft LS14500 or equivalent. It is a 3.6V LiSOCl2 (Lithium thionyl chloride) AA sized cell. Please dispose of the depleted battery in accordance with local requirements and the manufacturers recommendations.


flow rate total indicator

Flow Rate Total Indicator: Titan Pulsite Solo