The Pulsite Solo digital rate and totaliser with battery or dc power

spec-logo Pulsite Solo Rate & Total Indicator Electrical Connections


-PNP transistor – external power. This input would require external power.

-PNP transistor – external power.
This input would require external power.


-Logic level & TTL interface. 2KHz Max. External power not essential but recommended.

-Logic level & TTL interface. 2KHz
Max. External power not essential but
recommended.


Input type - Reed switch or contact closure. Maximum frequency 100 Hz.

Input type – Reed switch or contact
closure. Maximum frequency 100 Hz.


-Magnetic pick-up. 3mV to 24V peak to peak sine wave. 2KHz max.

-Magnetic pick-up.
3mV to 24V peak to peak sine wave.
2KHz max.


External power – Installations with contact closure or magnetic pick-ups can also operate with external power. For powered sensors external power should always be used.

External power – Installations with
contact closure or magnetic pick-ups can
also operate with external power. For
powered sensors external power should
always be used.


-NPN pulse i.e. Hall effect sensor. 2KHz. Max. This input would require external power.

-NPN pulse i.e. Hall effect sensor.
2KHz. Max. This input would require external power.